Workflow Innovation

Now taking on 5 founding clients in Thunder Bay & region

Turning repetitive tasks into automatic systems.

You didn't start your business to re-type invoices at 9pm. I find the jobs that eat your week, then set up simple systems that do them for you: on your computer, on your phone, and right on the shop floor.

For trades, shops, garages, clinics and restaurants · Fixed prices · You own everything

The kind of thing that lands on your phone

Walk-in cooler is warming upThe door's been open 12 minutes. Sent at 2:14 AM, not discovered at 7.
Quote ready to sendBuilt from the voice note you left on site. Tap to review.
Today's store summaryCustomer count, your busiest hour, and how today compares to last week.
Reorder draftedSomeone pressed the shelf button in Bay 2. Approve to send it to your supplier.

Sound familiar?

Most local businesses lose hours every week to the same handful of jobs.

Copying details from invoices and PDFs into a spreadsheet by hand

Quotes sitting in your truck as voice notes until the weekend

Finding out the freezer died when you open up in the morning

Never quite knowing what's in stock until it isn't

Savings calculator

What is the repetitive work costing you?

Move the sliders or type in your own numbers. Everything stays on your screen; nothing is sent anywhere.

hrs/week
$/hour
people

Estimated yearly cost of repetitive work

$26,624

832 hours a year

If even half of that were handled automatically, that's about $13,312 and 416 hours back each year.

Based on 52 weeks a year. This is a rough estimate to start a conversation, not a guarantee. The Time-Back Audit gives you real numbers for your business.

Founding clients wanted

I'm taking on 5 local businesses at a big discount, in exchange for honest feedback.

Workflow Innovation is new. Rather than pretend otherwise, I'd like to earn your trust by doing great work for a handful of businesses at a price that makes it an easy yes.

What you get

  • Time-Back Audit for $195 $495: half a day finding where your week goes, plus a fixed quote for each fix.
  • 50% off one simple build: a Quick Win $1,500 $750, or a Sensor Kit $2,400 $1,200.
  • The audit fee is credited toward that build if you go ahead within 30 days.
  • 30 days of free fixes after it's up and running.

The fine print: founding pricing covers one simple integration: a single job automated between tools you already use, or one standard sensor kit. Bigger multi-step or custom projects are welcome, but they're quoted at regular prices. If the audit turns up something bigger, I'll tell you up front.

What I ask in return

  • Honest feedback, including what didn't work.
  • A quick before-and-after check of how long the job took, so we both know it was worth it.
  • Permission to share the results, with your name only if you're comfortable.
  • A short testimonial, if you're happy with it.
Claim a founding spot

How it works

Three steps. No jargon. A fixed price before any work starts.

  1. 1

    I watch how your day really runs

    I spend half a day with you and your team, at the counter, in the office, in the bay. You get a short report on your top three time-wasters, what each is costing you, and a fixed price to fix it.

    Time-Back Audit · credited toward any build

  2. 2

    I build the fix

    Using the tools you already have wherever possible, plus small sensors or buttons when the problem lives on the shop floor. Most fixes are running within one to four weeks.

    Fixed price · 50% to start, 50% when it works

  3. 3

    It just runs, and I keep an eye on it

    I show your team how it works and leave a one-page guide. Want me to watch for dead batteries, broken connections and needed tweaks? That's an optional monthly plan.

    Care plans from $99/month · cancel anytime

What I can build

Some problems live in the office. Some live on the shop floor. I fix both.

Here are the kinds of systems I set up. Every business is different, which is why we start with the audit.

In the office

Messy invoices into one clean list

Drop in supplier invoices and PDFs. Serial numbers, model numbers and customer details land in one tidy spreadsheet, with no re-typing and no typos.

Product recalls, handled in an afternoon

When a furnace maker issues a recall, your past installs are checked for you. You get the affected customers, ready-to-send booking texts, a sensible route for your techs, and warranty forms already filled in.

Voice notes into finished quotes

Talk through the job on site. By the time you're back in the truck, a formatted quote is waiting for your OK, and a polite follow-up goes out if they haven't replied.

On the shop floor

Know how busy you really were

A small sensor at the door counts customers. At closing you get a text with how many came in, your busiest hour, and how today compares to last week.

One button to reorder

Press a button on the shelf when stock runs low. Your inventory updates and a supplier order is drafted for you to approve.

An early heads-up when something's off

Temperature, vibration and door sensors can text or call you when a freezer starts warming up, a compressor is vibrating more than usual, or a bay door is left open overnight.

An extra set of eyes, not a replacement. Every system is tested on site before handover, and care plans include ongoing monitoring. But sensors, batteries, Wi-Fi and phone networks can fail. These alerts add to, and never replace, required safety alarms, fire and gas detection, manufacturer protections, or regular human inspections. Messages to your customers always wait for your OK.

A real, working system

Featured Project: Smart Energy Management

Workflow Innovation doesn't just automate paperwork or install sensors. It can connect complicated systems and equipment so they make sensible decisions on their own. Here's a real example.

Autonomous Multi-Energy Heating Optimization

A smarter heating system that automatically chooses the most economical way to heat a home, while tracking estimated energy use and daily heating costs.

Smarter heating. Clearer costs. Less hands-on management.

What if your heating system could work out which energy source is cheapest to use right now, and switch to it on its own?

I built a system that connects an NTI propane boiler, a heat pump, forced-air heating and a smart thermostat through Home Assistant. It regularly collects the boiler's operating data, compares electricity and propane costs, and selects what it calculates is the most economical heating method available.

But it doesn't stop there. The homeowner also sees an estimated daily heating cost, tracks estimated propane use, and gets an idea of how much is left in the tank and when a refill may be needed.

Instead of juggling several heating systems and trying to decode energy bills, the homeowner has a system doing the analysis and coordinating the equipment.

The result: smarter heating decisions, better visibility into energy costs, and less manual work.

How it fits together

Runs on its own as long as the internet connection and the outside services it relies on are available. The boiler's own controls always stay in charge of its safety and internal operation.

What this project connects

  • Existing mechanical equipment
  • Cloud-based applications
  • Home Assistant
  • Smart thermostats
  • Energy pricing data
  • Automated decision-making
  • Customer-facing reporting dashboards

A third kind of work

Intelligent Equipment & Energy Systems

Alongside office automation and shop-floor sensors, this project shows a third kind of work: connecting equipment, energy data and control logic so systems run smarter on their own. That could mean heating optimization, equipment monitoring, energy management or other automated controls. Every project like this is custom, scoped after an audit and quoted individually.

The problem

This home can be heated three ways: a heat pump, forced air, or an NTI GF150 combination boiler running on propane. Which one is cheapest changes with electricity rates, propane prices, the time of day and how efficiently each one runs.

Without automation, the homeowner would have to compare all of that by hand. The boiler's runtime and fuel data was sitting in the NTI app, but nothing turned it into a simple answer to "what did heating cost today?"

The most useful part

A daily heating cost, in dollars

Instead of runtime hours, fuel figures and utility rate sheets, the homeowner gets a plain daily estimate of what heating the home cost. It's built from the equipment's reported data and the actual electricity and propane prices they pay.

It's the same idea I bring to every business: take information you already have, and turn it into something you can act on.

Automatic energy optimization

Picks between the available heating methods based on estimated operating cost and conditions.

Daily heating cost estimates

Turns equipment data and energy prices into an easy-to-read daily cost.

Propane use tracking

Uses the boiler's reported consumption data to follow estimated fuel use over time.

Propane refill forecasting

Estimates fuel remaining and roughly when a refill may be needed.

Connected equipment

Ties together existing heating equipment, a smart thermostat, cloud services and automation software.

Runs on its own

Makes heating-mode decisions without constant homeowner involvement, as long as internet and services are available.

Technical details: how it works under the hood
Home Assistant
The central platform: pulls in the data, runs the cost comparison, and makes the decision.
NTI GF150 combi boiler
Main source of reported propane consumption and boiler runtime data.
NTI application
Provides periodic spreadsheet reports with propane use, runtime and history.
Smart thermostat
The interface used to set the selected heating mode.
Heat pump and forced air
Alternative heating sources the system can choose between.
Electricity pricing
Time-of-day rates, used to estimate the cost of electric heating.
Propane contract pricing
Used to calculate the estimated cost of propane heating.
  1. Every few hours, Home Assistant checks the NTI application and downloads its available spreadsheet reports.
  2. The reported propane use and runtime are combined with current electricity rates and the propane contract price.
  3. The system estimates the cost of each available heating method and selects the most economical one.
  4. The chosen mode is sent to the smart thermostat. The boiler's own logic board continues to manage its internal operation.
  5. The same data is turned into an estimated daily heating cost, an estimate of propane remaining, and a refill forecast.

What's measured and what's estimated

  • Propane use comes from the figures the NTI boiler and app report. No separate flow meter confirms them. The tank's own gauge is only a rough visual check.
  • Daily heating costs and propane remaining are estimates, based on available equipment data and the energy prices that apply.
  • Any electricity use worked out from equipment ratings or runtime, rather than metered directly, is also an estimate.
  • No savings figure is claimed here. Real savings would need before-and-after measurement.
  • The automation depends on the internet and the outside services it uses. The boiler's built-in safety and operating controls always have the final say.

I don't just automate tasks. I connect systems, take the guesswork out of everyday decisions, and turn information into practical results.

Pricing

Straight prices. No surprises.

Every job is quoted in writing before work starts. Regular prices are shown below. Founding clients pay $195 for the audit and half price on one simple build (a Quick Win or a Sensor Kit).

Start here

Time-Back Audit

$495

Credited 100% toward any build booked within 30 days

  • Half a day on site, watching real work
  • Your top 3 time-wasters, in plain English
  • Hours saved and a fixed price for each fix

Office & paperwork

Software fixes

Quick WinOne job, automated between tools you already use

$1,500

Connected WorkflowA multi-step system across 2–4 tools, like the recall example

$3,500

Shop floor + software

Sensor systems

Sensor KitDoor counter, temperature alert or bay-door alert. Hardware included

$2,400

Custom Shop-Floor SystemSeveral sensors or buttons tied into ordering, stock or maintenance

from $5,000

Optional care plans

Month to month, added once your build is finished. Sensors, logins and apps need looking after: a battery dies, a password changes, an app updates. These plans mean you never have to think about it.

Watch$99/mo

I monitor your systems and get alerted if anything stops working or a battery runs low, then fix whatever breaks.

Best for most businesses

Care$249/mo

Everything in Watch, plus 2 hours a month of changes or tweaks, and a check-in every three months on what else we could automate.

Partner$499/mo

Everything in Care, plus 4 hours a month, same-day response, and one new small automation every quarter.

For businesses with lots of ideas

Prices in Canadian dollars, plus HST where applicable. Software subscriptions, if any are needed, are in your name and billed to you directly, so you always own your setup.

About

Hi, I'm Garrett. I fix the problems other tech people can't see.

Most tech consultants only work inside a web browser. Most tradespeople don't touch software. I do both.

I've spent years building with small electronics and sensors, and I know how to connect them to the spreadsheets, texts and apps you already use. So when the problem starts on the shop floor, at the cooler or the bay door, I can fix it there too.

I'm local, I show up in person, and I explain everything in plain English.

  • Fixed prices. Quoted in writing first.
  • You own it all. Accounts, data and hardware.
  • You approve it. Nothing reaches a customer without your OK.
  • Tested before handover. Low-voltage, battery and plug-in installs only.

Common questions

Why is the founding offer so cheap?

Because I'm new, and the best proof is real results for real local businesses. You get a big discount; I get feedback and results I can point to. The discount is for simple, single-job builds so we can both get a quick win. Once the 5 spots are filled, regular prices apply.

Do I need to buy new software?

Usually not. I start with what you already use, like your email, spreadsheets, accounting or job software, and only suggest something new when it clearly pays for itself.

What happens if something stops working?

Every build comes with 30 days of free fixes. After that, a care plan covers it, or you can call me as needed. You own everything, so you're never locked in.

Is this one of those AI things?

Sometimes it's part of the toolbox, for example to read a messy invoice or tidy up a voice note. But you're buying hours back, not technology, and anything customer-facing waits for your OK.

Can sensor alerts replace my alarm system or inspections?

No. They're an early heads-up on top of what you already have. Anything required by code, insurance or the manufacturer, like fire and CO alarms, refrigeration alarms, equipment safety cutoffs and scheduled inspections, stays in place. I test every install before handover, and care plans watch for dead batteries and lost connections, but no system is guaranteed to catch everything.

Will a door counter record my customers?

No. By default I use simple door and motion sensors that only count. There are no faces and no footage.

Find out where your week is going.

Call or text me with the one job you'd love to never do again. I'll get back to you within one business day to set up a free 15-minute chat.

Serving Thunder Bay and the surrounding region

Call or text

(807) 356-4190

Ask for

Garrett